• Due to Coronavirus (COVID-19),
  • We've made change to some of our policies
  • Which may affect the service we provide
  • Due to Coronavirus (COVID-19),
  • We've made change to some of our policies
  • Which may affect the service we provide

Extra Non-Yellowing Ultra Clear Epoxy Resin-Hardener Kit AB 750 gr Jewelry Making DIY Crystal Transparent Glue
Extra Non-Yellowing Ultra Clear Epoxy Resin-Hardener Kit AB 750 gr Jewelry Making DIY Crystal Transparent Glue
Extra Non-Yellowing Ultra Clear Epoxy Resin-Hardener Kit AB 750 gr Jewelry Making DIY Crystal Transparent Glue
Extra Non-Yellowing Ultra Clear Epoxy Resin-Hardener Kit AB 750 gr Jewelry Making DIY Crystal Transparent Glue
Extra Non-Yellowing Ultra Clear Epoxy Resin-Hardener Kit AB 750 gr Jewelry Making DIY Crystal Transparent Glue
Sale

Extra Non-Yellowing Ultra Clear Epoxy Resin-Hardener Kit AB 750 gr Jewelry Making DIY Crystal Transparent Glue

Regular price $79.59 $65.00 18% OFF

This special price ends in : This price of this item will revert back to $79.59 at the end of this countdown

Low Stock : Left

Shipping

Ask about this product

Low Stock : Left

Extra 750 gr A+B Non-Yellowing Clear Epoxy Resin for Small Volume Applications

Can be used in small volume applications.

Packaged as 750 grams set in components A and B.

Has a transparent appearance.

Non-Yellowing.

Odorless.

Shiny.

Solvent-free.

No VOC.

Mix in 2:1 ratio (use weight units).

Mix gently until homogeneous and smooth.

Pour into the mold and let it cure.

Gel time: 150 - 180 minutes.

Demolding time: 18 - 24 hours.

Usage Areas

Small volume applications such as Jewelry, accessories, magnet.

Coating paintings, tables, artworks, wood etc.

Suitable for use with silicone molds.

Not suitable for epoxy table pour.

Product features

Packaged as 750 grams set in components A and B. (500 grams resin and 250 grams hardener)

Mixing ratio is 2:1 by weight (2 Unit Resin + 1 Unit Hardener).

Ultra Clear (Fully Ultra Transparent).

Room temperature curing.

Non-Yellowing

Low viscosity (Good fluidity).

High strength (Not brittle).

Water and oil resistance.

Aging resistance, Environment protection.

No ripple.

Odorless.

Shiny. Bright surface.

Solvent-free.

No VOC.

Mix in 2:1 ratio (use weight units).

Mix gently until homogeneous and smooth.

Pour into the mold and let it cure.

Gel time: 150 - 180 minutes.

Demolding time: 18 - 24 hours.

Can be used with a maximum thickness of 10 mm.

 

Usage

Mix the two products packed as components A and B into 2A and 1B. Measure using a precision scale. While mixing, pour component "A" into component "B" and mix at a slow speed until obtaining a homogenous and smooth appearance. Preferably, vacuum the prepared mixture, then pour into the application mold and let it cure. In coating applications, you can spread the mixture on the surface with a trowel, roller or brush and let it cure.

Considerations

Epoxy resin is bicomponent and cannot be used without mixing the components together.

Do not use outside the specified application thickness range. Low thickness can cause late curing and high thickness can cause burning / yellowing problems.

Curing speed is related to volume size and temperature. Smaller volume applications curing time will be longer. Bigger volume applications curing time will be faster. Curing time will be longer in cold temperature and curing time will be short in warm temperatures.

The gel time and demoling time given above are based on room temperature and volume of 100 grams.

Never heat the product during mixing and application. You can use torch or lighter to remove surface foams.

You can use epoxy pigment for coloring. It is fully compatible with Resinin Tone Epoxy Pigments.

Use a vacuum machine to obtain fully transparent bubble free epoxy.

Use precision scales when preparing the mixture of products.

Do not mix any other materials which do not fit into the system for any reason.

Make sure that the equipment you use during the application is dry and clean.

Work at room temperature. Low temperature can cause late drying and high temperature can cause early drying.

Work at room temperature. Low temperature can cause late drying and high temperature can cause early drying

Make sure that the poured product is completely hardened and then demold. In coating applications, do not move the system until the product is completely cured.

Do not forget to use work safety equipment.

Avoid contact with skin.

Store the unused product at 10 and 30 °C degrees indoors away from direct sunlight.

Do not keep the products open.

Do not leave cured products under direct sunlight.

Yellowing may occur in unused products.

people are currently looking at this product

Estimated delivery time 14-30 days

Click to edit the product in Ali Orders.
Note: only show for shop owner